OMRON E6C3-AG5C-1024ppr Rotary Encoder absolute type

Omron E6C3-AG5C-1024 p/r

  • Categorise:  Absolute Shaft model
    Diameter: 50 mm dia.
    Power supply voltage:12 to 24 VDC (-10% to +15%) Ripple (p-p) 5% max.
    Current consumption: 70 mA max.
    Resolution:    1024 P/R
    Inrush current:    Approx. 6 A (0.8 ms)
    Output code:    Gray code
    Control output:    Output type    NPN open collector
    Load power supply voltage:    30 VDC max.
    Load current:    35 mA max. (Sink current)
    Residual voltage:    0.4 V max. (at sink current 35 mA)
    Logic:    Negative
    Direction of rotation: Output code increases for CW (as viewed from end of shaft)
    Positioning signal:   Not provided
    Strobe signal:    Not provided
    Parity signal:    Not provided
    Max. response frequency:    20 kHz
    Rise and fall times of output: 1 µs max. (Cable length: 2m, Sink current 35 mA)
    Starting torque:    Room temperature: 10 mN.m max.
    Low temperature: 30 mN.m max.
    Moment of inertia:    2.3 x 10**-6 kg.m**2 max.
    Shaft loading:    Radial: 80 N     Thrust: 50 N
    Max. permissible rotation:    5000 r/min
    Ambient temperature: Operating: -10 to 70℃ Storage: -25 to 85℃
    Ambient humidity:  Operating: 35 to 85%  Storage: 35 to 85%
    Insulation resistance:    Between charged parts and the case: 20 MΩ min. (at 500 VDC)
    Dielectric strength:    Between charged parts and the case: 500 VAC 50/60 Hz 1 min
    Vibration resistance:    Destruction: 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions
    Shock resistance:    Destruction: 1000 m/s**2 for 3 times each in X, Y, and Z directions
    Degree of protection:    IEC: IP65
    Company standard: Oil resistance
    Connection method:    Pre-wired models (Cable length: 2 m)
    Material:    Case: Aluminum  Main: Aluminum  Shaft: SUS303
    Accessories:    Instruction manual