Categorise: Incremental Shaft model

Diameter: 50 mm dia.

Power supply voltage:5 to 24 VDC (-5% to +15%) Ripple (p-p) 5% max.

Current consumption: 80 mA max.

Resolution: 1024 P/R

Inrush current: Approx. 9 A (0.3 ms)

Output phases: A, B and Z

Control output Output type: NPN open collector

  Load power supply voltage: 30 VDC max.

  Load current: 35 mA max. (Sink current)

 Residual voltage: 0.4 V max. (at sink current 35 mA)

Starting positional point: Supported

Max. response frequency: 100 kHz

Phase difference on output: 90±45 °between A and B (1/4 T ± 1/8 T)

Rise and fall times of output: 1 µs max. (Cable length: 2 m max., output voltage: 5 V, load resistance:1 kΩ)

Starting torque: Room temperature: 10 mN.m max.

Moment of inertia: 1 x 10**-6 kg.m**2 max.

Shaft loading: 

Radial: 50 N
Thrust: 30 N

Max. permissible rotation: 6000 r/min

Protective circuit: Output short-cut protection
Power supply reverse polarity protection

Ambient temperature: 

Operating: -10 to 70℃
Storage: -25 to 85℃

Ambient humidity:                                

Operating: 35 to 85%
Storage: 35 to 85%

Insulation resistance: Between charged parts and the case: 100 MΩ min. (at 500 VDC)

Dielectric strength: Between charged parts and the case: 500 VAC 50/60 Hz 1 min

Vibration resistance:                            

Destruction: 10 to 500 Hz, 2-mm or 150 m/s**2 double amplitude for 11 min 3 times each in X, Y, and Z directions

Shock resistance:                                           

Destruction: 1000 m/s**2 for 3 times each in X, Y, and Z directions

Degree of protection: IEC: IP64
Company standard: Oil resistance

Connection method: Pre-wired models (Cable length: 2 m)

Material:                                               

Case: Zinc alloy
Main: Aluminum
Shaft: SUS420J2

Weight: Package: Approx. 400 g

Accessories:  Instruction manual